Industrial segmented lifting door: The design principle of industrial segmented lifting door is to install the track as close as possible to the inside of the building, which can greatly save internal space of the building. The sliding door can be designed into different installation methods according to the size and shape of your building. The selection of door lifting method can be based on the following basic conditions: door opening size; Upper space of the door opening; Side space of door opening; The depth of the door opening. Based on the actual situation of the building site and the owner's requirements for space use, the following lifting methods can be achieved, greatly meeting the requirements for rational use of space.
1. Standard improvement: suitable for door top space within 200-300mm.
2. High level lifting: suitable for door top space at: ＞ 300mm ＜ door opening height
3. Vertical lifting: suitable for door top space:>or=door opening height
4. Oblique roof lifting: suitable for the slope shape of the door ceiling, with the track parallel to the ceiling.
The industrial segmented lifting door can be opened in the following ways according to the requirements of the usage site:
1. Electric opening: It can be controlled by a button and has a manual emergency unlocking device, which is commonly used.
2. Manual opening: Use a manual hoist to open (commonly used)
3. Geomagnetic ring: Especially suitable for places where the entry and exit of hairpin trucks and forklifts need to be closed in a timely manner.