How to accept and test the safety bottom edge of the fast rolling shutter door

Oct 11, 2023 Leave a message

Quick rolling shutter doors are often used in many factory workshops because they have many advantages such as convenient opening, insulation, cold insulation, insect resistance, wind resistance, dust prevention, sound insulation, fire prevention, odor prevention, and lighting. The fast rolling shutter door needs to be convenient for people or vehicles to enter and exit, so it is very necessary to ensure the safety performance of the fast rolling shutter door. The bottom edge of the fast rolling shutter door is safe and soft. When the safety bottom edge of the fast rolling shutter door is installed, its function needs to be tested and accepted. It is important to pay attention to these steps:

1、 First, close the emergency stop button of the fast rolling shutter door, turn on the power supply of the electric control box of the fast rolling shutter door, press the learning button on the bottom receiver panel once, and check that the signal receiver light is on.

2、 Press the pressure hose inside the safety bottom edge cloth pocket of the fast door several times, and the signal indicator light flashes to indicate successful reception. Press the bottom edge pressure hose repeatedly, and each time the receiver light is on, the signal connection is completed.

3、 Open the emergency stop button on the electric control box of the fast rolling shutter door, press the pressure hose inside the bottom cloth pocket, and the door body of the fast rolling shutter door will automatically rise upon receiving a signal and operate normally.

4、 So during the testing of the safety bottom of the fast shutter door and the use of the fast door, if it is found that the electronic control box cannot receive the safety bottom signal, it is necessary to pay attention to checking the battery and bottom pressure hose inside the safety bottom transmitter. If the battery is found to be depleted, it is necessary to replace it with a new one. If the bottom pressure hose is damaged or leaking, the damaged or leaking hose should be sealed and replaced with a new safe bottom pressure hose if necessary.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry