Product Description:
Our photocell beam sensor is a safety protection device, used to be installed on sides of Automatic door, including sliding door, side hung door, Roller shutter door, industrial door, Garage door, etc. One send out signals, the other receiving them. If a moving object passes under the door during closing, it will be sensed by our Photo Beam Sensor. The door will automatically rebound and open. To prevent people or pets from being pinched by the door.
Pictures:
Specifications:
|
Product Name |
Photo Beam Sensor |
|
Working Power supply |
12V~24V |
|
Detection distance |
20M |
|
Size |
49.2*76*21.6mm |
|
Alarm current |
15-30(mA) |
|
weight |
0.1kg |
|
Relay |
1A Max 36V |
|
Operation temperature |
-20-70(℃) |
|
frequency |
1.92 KHz |
|
Wavelength |
940MM |
|
Item No. |
HI01 |
Installation instructions
The optimal installation height should be 20cm at least, and the installation distance should not be less than 2 meters. When installing, the infrared device should be perpendicular to its position and in a straight line at the same level. When installing, the bottom part should be installed first, and then the disassembly part should be installed. When all the wires are installed, then fix the Photo Beam Sensor on two side of the door and connect it to the wires.
Precautions:
Due to the high transmission power of this product, there may be no response when the transmitter and receiver are too close. At this point, they should be pulled apart for at least one meter. When the installation distance is very close, insensitivity may occur. You can remove the focus lens in the transmitter and receiver to improve sensitivity.
Package contents:
1*pair photocell beam sensor
1*installation accessories package
1*instruction Manual
Features:
The plastic shell is made of high-strength baking paint, which will not fade or fade after long-term use, making it the top choice for sensors
Great effect, effectively ensuring the safety of life and property.
Strong signal, can be used even in foggy weather.
Large control range.
Multiple application scenarios, convenient installation.
Our Services
Waranty: 2 years
If you found any defective photocell beam sensor caused by production, after confirmation, we would sent you new ones, or compensate for it.
CONTACT:
Name: Jiachang Liu
Email: hechixueyuanliu@163.com
Mob: 86-18218147160
Whatsapp: 86-18218147160
Wechat: 86-18218147160
QQ:1919584523
Hot Tags: high speed door infrared photo beam sensor, China high speed door infrared photo beam sensor manufacturers, suppliers, factory, picket retractable gate, high speed door for shopping malls, high speed door for corrosive environments, corrosion resistant retractable gate, high speed door for non corrosive environments, rust proof retractable gate
